WLO's or "What line over" toggles are toggles made by Vertigo Base Outfitters which at this time are only compatible with the Syko risers also manufactured by Vertigo. If you already have Syko risers (with snaps below guide rings) you can simply replace your toggles when you jump slider up.
The point of this post is to address an alarming situation that has come to our attention. When jumping SLIDER DOWN you should route the brake lines outside the guide rings and not through them, no matter what toggles you have.
It's a lot quicker to unstow the brake and throw it than to find the ring on the toggle.
The WLO's were invented to release a line over when jumping slider up. No need to reinvent the wheel here, stick with the normal routing when you're slider down.
Thanks,
Jimmy P. and Marta E.
Vertigo Base Outfitters;-)