I had a friend lose a side mount to a riser strike. It took the whole d-box off clean, and the camera cratered (there's a very large talus on this particular cliff, so no one ever tried to recover it).
A jumper experienced multiple line twists, and was unable to kick out because his side mount was caught up in the twists, object strike, T-wall, Italia . Good luck.
take care,
space
A belgian jumper had the same on the same wall, was top mounted camera...
you could always put your side mount in the trash and your camera in a bum bag or "fanny pack" (sniggers) and use one of those lipstick cam things...i bought one from these guys...not a bad price and theres no chance of a riser strike...
http://www.rfconcepts.co.uk/sony_colour_ccd.htm
hope this helps...
Sean
BASE 621
Ghosty,
you and Space are talking about the SAME event and the SAME belgian jumper, our friend BASE #684. In fact, the information I have about the accident (personal e-mail from BASE #684) is that BASE #684 had a top mounted video camera, which was quite high above his helmet, and that the line twists got caught onto the video camera, making impossible to BASE #684 to clear them...
I know for sure that after BASE #684 recovery and his successive return to skydiving/BASE jumping, he switched to a custom made Belgian helmet that has got a side-mount for video camera, with such a mount being tapered with the rest of the helmet, having no sharp angle nor flat surface to present to riser.
Stay safe out there
Blue Skies and Soft Walls
BASE #689 :D
e-mail: base_689@yahoo.com
Yep, I stand corrected, The side mount incident had a different outcome, multiple linetwists, lost camera and almost object strike. The only good thing was that other videos were recovered that were lost from the same exit point.
Take care,
space
I don't have as many jumps as a lot of folks, but I haven't had any problems with mine.
i had my wideangel lense kicked off by riser on a slider off jump. only the camera and lens were damaged(site mount on bonehead),camera is still roling,the les is dead after a freefall from aprox 180ft to hard ground.
Have Fun
Faber
Being dead but not dead BASE #!
Nominated by Spiderman...
There is new camera helmet that mounts from the inside.
Don't know the manufacturer, might be bonehead. Nice and smooth on the outside, looks great for base jumping. But there is still the worry of losing your wide angle lens.
Good luck.
clint
Bookmarks