Results 1 to 2 of 2

Thread: Premature Brake Release

  1. #1
    BLiNC Magazine Founder mknutson's Avatar
    Join Date
    Jul 1994
    Location
    Perigee Pro, Flik DP
    Posts
    4,380
    Blog Entries
    21

    Premature Brake Release

    Premature Brake Release: A premature brake release occurs when the stowed toggle comes undone before you intend it to. This can happen if you don’t stow your toggles properly and the opening shock applies sufficient force to bump them off. Alternatively, you might bump them off yourself as you reach up for risers (to correct heading for example). This is more likely to happen when you use stiffened toggles.

    This is a video that shows a jumper that does a double back flip, reaches up too fast and drops one (1) toggle only.
    [youtube]KViOgKQwJes[/youtube]

    There are 2 different schools of thought:

    Throw the other toggle

    By throwing the other toggle, you throw away ~25% of your canopy control. This will make the rear-riser flair symmetrical, but you will only have ~6" of flair. Prepare for a tough landing.

    Use the remaining toggle

    By using the other toggle, you have an extra 25% canopy control, but your flair will seem a little strange.


    footer

    Problems
    Last edited by mknutson; July 13th, 2009 at 04:06 PM.

  2. #2
    BLiNC Magazine Supporter (Silver)
    Join Date
    Oct 2002
    Posts
    149

    Re: Premature Brake Release

    I'm a firm believer in do not throw the other toggle. Flaring with one riser and one toggle is not difficult. Not only is the canopy easier to control, it it will shut down with greater ease. Prepare to PLF and do so if necessary.

    Flying with just rears with the brake lines trailing, is challenging. The ability to fly slower than full flight no longer exists. The control stroke is very short. Commonly people never practice riser or riser/toggle landings until a line releases for whatever reason.

    The usual scenario for over control is as follows.

    When both toggles are gone, hopefully the landing zone is large enough to accommodate. Fly to the landing zone at full speed, at 10 feet, flare too hard. The canopy first plains out then stops, stalls, and falls/flies backward. The jumper is traveling forward so he is not under the canopy yet. The jumper then falls directly onto their back from a much greater height than expected. In my experience of watching people do this, it's usually around 6 to 8 feet. That's a big fall to just back flop. Take into account the terrain. Take a back drop into rocks or rebar ... You get the picture.

Similar Threads

  1. Brake Settings
    By mknutson in forum BASEWiki
    Replies: 0
    Last Post: May 4th, 2009, 05:22 PM
  2. Help with brake settings
    By pebble beach in forum The 'Original' BASE Board
    Replies: 1
    Last Post: May 8th, 2003, 02:37 PM
  3. Brake settings
    By sean in forum The 'Original' BASE Board
    Replies: 1
    Last Post: January 30th, 2003, 01:53 PM
  4. brake settings
    By guest in forum The 'Original' BASE Board
    Replies: 1
    Last Post: July 25th, 2002, 09:24 AM
  5. SUBJECT: Perrine and Premature Warlock opening
    By guest in forum The 'Original' BASE Board
    Replies: 3
    Last Post: July 10th, 2000, 03:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •