Results 1 to 6 of 6

Thread: PC Logic

  1. Header
  2. Header-59

BLiNC Magazine, always served unfiltered
  1. #1
    Staff Member
    Join Date
    Jan 1970
    Location
    Perigee/Gargoyle
    Posts
    516

    PC Logic

    I witnessed 17 assymetrical orbiting pilotchutes freak openings. so the moral to the story is hook up your pc symmetrical.reinforcement on the block of mesh suxs bigg time.
    PC connosiure.
    space

  2. #2
    guest
    Guest

    RE: PC Logic

    I have noticed some differences in behaviour of 4 and 6 spoke ZP pilot chutes...the 4 spoke seems to skate around whereas the 6 stays rock steady...is this just coincidence or is there actually a recognised convention here.

    cheers
    Sean

  3. #3
    Staff Member
    Join Date
    Jan 1970
    Location
    Perigee/Gargoyle
    Posts
    516

    RE: PC Logic

    Yo, a 6 spoke is/could be kinda cool. The spokes are hangin at 60° apart. so it will play the ventilator with the warp and weft of the mesh, Like the right side will be more on the bias than the left side which will in turn allow for more elongation of the mesh and the uppityness of the skirt of fabric. creating a spinner pc, spinners are better than orbiters, The old Para-Innovators 52" (2kg) pc was very stable (16 gore) as it was a 3d design and all present designs are only 2d. I think that an 8spoke would be better because of the angularity of the spokes vs warp and weft of the mesh. I would imagine that one could build 2 diff pilotchutes with only the tapes 45° differing and have a resulting 40% (32 vs 38?)drag difference. The bottomline is if you have a series of off heading openings favoring one side, IT IS YOUR PC that is causing it. Some jumpers will refuse to listen to me on this but it will become a well known fact for the rest of us later as it is for me now.I donīt think ZP is the prob. proper angularity orientation of the mesh/tapes/fabric is the deal for the present 2d pc designs for stability. till later,
    space

  4. #4
    guest
    Guest

    RE: PC Logic

    now you come to mention it...i was using a four spoke 46zp for sub 350' and had a few off headings all going the same way,ive gone over to the 6 spoke 42 and had no problems,someone else tried my 46 and had the same sketch..the 42 has kicked arse..although my experience is low i cant argue with the topcam video of my jumps which seem to prove the theory..will CR and BR make eight spokers if asked?

    nice one
    SEAN

  5. #5
    guest
    Guest

    RE: great pilot chutes

    ParaTech Rigging!
    http://www.skydivebase.com
    Symetrical attachment point.


  6. #6
    guest
    Guest

    RE: great pilot chutes

    Cheers for the steer ER,the components page is still under construction but at least I know where to look now!!

Similar Threads

  1. Video: Sat kill logic
    By blinc in forum Speed Flying, Speed Riding, Paragliding News
    Replies: 0
    Last Post: December 14th, 2011, 03:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •