View Full Version : Relax /Troll
381
June 17th, 2003, 06:45 AM
Any opinions on this base rig/main by performance-variable?
Anyone jumped it?
Considering to get one
Thanx in advance
http://www.performance-variable.com/EN/03_Gurtzeuge/03.htm
Lars
dexter
June 17th, 2003, 02:39 PM
It looks like they're using Type17 mini risers.
Stay safe out there! ---Dex
dexterbase@hotmail.com
dexter
June 17th, 2003, 02:55 PM
It looks like they're using Type17 mini risers.
Stay safe out there! ---Dex
dexterbase@hotmail.com
imported_Tom Aiello
June 19th, 2003, 09:12 AM
I inspected one of these rigs in Italy last year.
They are, in my opinion, dangerous to jump. Not only are they using mini-risers, they are using min-risers with a hole punched in the center of them.
The jumper who's rig I inspected was relatively new, and didn't think it was a big deal. His basic reasoning was "well, they wouldn't sell it if it wasn't safe, would they?"
He went home and asked his mentor, BASE 283 (a man with just a wee bit of rigging and BASE experience--like 20 years of rigging work). Shortly thereafter, I got an email from 283, mentioning that the new jumper had stopped using the performance variable risers, and had a real set of BASE risers.
--Tom Aiello
tbaiello@mac.com
imported_Tom Aiello
June 19th, 2003, 09:12 AM
I inspected one of these rigs in Italy last year.
They are, in my opinion, dangerous to jump. Not only are they using mini-risers, they are using min-risers with a hole punched in the center of them.
The jumper who's rig I inspected was relatively new, and didn't think it was a big deal. His basic reasoning was "well, they wouldn't sell it if it wasn't safe, would they?"
He went home and asked his mentor, BASE 283 (a man with just a wee bit of rigging and BASE experience--like 20 years of rigging work). Shortly thereafter, I got an email from 283, mentioning that the new jumper had stopped using the performance variable risers, and had a real set of BASE risers.
--Tom Aiello
tbaiello@mac.com
imported_Tom Aiello
June 19th, 2003, 09:26 AM
I've also noticed that the PC shown has a hackey handle.
Before jumping with a hackey, be sure to find out about last year's wingsuit fatality:
http://www.dropzone.com/cgi-bin/forum/gforum.cgi?post=244302
The investigators of this accident concluded that the hackey handle was at least partially responsible for the fatality. The accident report can be found on Flare's web page:
http://www.linetwist.net/
More information here:
http://www.blincmagazine.com/forum/dcboard.php?az=show_topic&forum=7&topic_id=161&mesg_id=161&listing_type=search
--Tom Aiello
tbaiello@mac.com
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.